Currently viewing: Senco FramePro SN901XP Pneumatic Framing Clipped / D Head Strip Nailer 34° from Nailfast
Product ID: 00292
View QR Code
Share on Facebook
||Senco FramePro SN901XP Pneumatic Framing Clipped / D Head Strip Nailer 34°
Senco FramePro SN901XP Pneumatic Framing Clipped / D Head Strip Nailer 34°
This well-balanced light weight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw, and smooth-shank clipped head nails. senco XP tools are specifically engineered for demanding pros and demanding environments. Built with enhanced features and superior components – SENCO’s XP tools always provide the best performance and longest life.
Framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assem- bly, pallet making, furniture frame assembly and fencing.
Features and Benefits
Well balanced, ergonomic design
Uses less air to drive nails- Highly efficient internal design
Dry Fire Lockout
Reduced jams and mis-feeds - Patented TrueDrive magazine
Low profile design fits easily between studs and joists
Retractable Rafter Hanger
- Contact or sequential trigger actuation - Patented drive selector*
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applica- tions.
Contact Actuation (also known as dual action, bounce or bottom fire) operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions.
Operating Pressure:70-120 psi (4.8 - 8.3 bar)
Air Consumption:(60 cycles per min.) 5.2 scfm
Tool Weight: 7.8 lbs (3.54 kg)
Height: 11.9' (302 mm)
Length:17.3' (440 mm)
Width:4.5' (114 mm)
Air Inlet:3/8' NPT
Fastener range:Smooth:0.113' x 2' - 0.135' x 31/4'
Ring:0.113' x 2' - 0.120' x 3'
Screw:0.113' x 2' - 0.120 x 3'
Warranty:1 year (90 days on moving / wear and tear parts)
Parts Schematic Diagram / Parts List
Not yet rated
The PDF(s) below contain additional information...
Senco_SN901XP_Spec_Sheet.pdf (210 kb)